Metal Roofing in Slades Corners, Wisconsin — Lifetime Interlock® Aluminum Shingles Installed Locally
Slades Corners Metal Roofing Experts Installing Lifetime Interlock® Aluminum Shingles Since 2001
Metal Roofing Built for Slades Corners's Heavy Rain, Snow Loads, Windstorms & Lifetime Protection
Interlock Metal Roofing — founded May 17, 2001 — is the exclusive authorized installer of Interlock® Lifetime Aluminum Roofing Systems serving homeowners in Slades Corners, Kenosha County, WI. Our Interlock Lifetime Roofing System pairs heavy-gauge, fire-resistant aluminum with the Alunar® Coating System to deliver energy-efficient, cool-roof solutions engineered for superior snow-shedding, ice-dam resistance, and long-term protection against freeze–thaw cycles, hail and high winds common to southeast Wisconsin. We provide roof replacement and re-roofing throughout Slades Corners, offering the timeless look of slate, cedar shingles, shake, Mediterranean tile or standing seam with the strength of metal — all backed by a Lifetime Warranty.

Performance you can measure (all climates)
Weather Resistant
Tested to 193+ km/h (120 mph) winds
Durable
Lifetime-Limited, transferable warranty
Energy Efficient
Reflective cool-roof lowers cooling costs
Freeze–Thaw Durable
Endures ~83 freeze–thaw days a year
Rain & Moisture Proof
Repels ~838 mm of rain a year
- Precision weatherproof seams (profiles: slate, cedar, shake, tile) and mechanical fastening (profile: standing seam) deliver long-term leak protection during wind-driven rain events
- Aluminum panels coated with the Alunar® Coating System (no visible aluminum surface) for a durable, low‑maintenance finish and enhanced corrosion resistance
- Engineered for Slades Corners’ heavy Midwest snow loads to shed snow and reduce roof‑structure stress during prolonged storms
- Snow‑shedding panel geometry and load capacity minimize accumulation and help prevent ice dams during frequent freeze–thaw cycles in Kenosha County
- Tested to 193+ km/h (120+ mph) for wind uplift resistance, providing a performance margin against severe gusts that can affect southeastern Wisconsin
- Interlocking panel joints and factory‑applied seals maintain watertight performance through Slades Corners’ spring and fall wind‑driven precipitation events
- Designed to tolerate repeated freeze–thaw cycles without joint fatigue or seal degradation, reducing repair frequency on inland roofs
- Aluminum substrate resists corrosion from road‑salt spray and airborne de‑icer residue common during Kenosha County winters
- Class A fire-rated available for added fire and ember resistance on rural properties and wooded lots near Slades Corners
- UL 2218 Class 4 impact resistance to protect against hail, falling branches, and storm debris typical of regional severe‑weather events
- Energy‑efficient cool‑roof characteristics reduce summertime heat gain and lower attic temperatures during Midwest heat waves
- Solar‑compatible profiles and mechanical fastening options simplify modern bracket‑mounted photovoltaic installations for Slades Corners homes
- Fully recyclable aluminum construction offers long service life and reduced lifecycle environmental impact compared with asphalt shingles
- Premium architectural profiles replicate slate, cedar shake, and tile while offering standing‑seam options to match Slades Corners neighborhood aesthetics
- Finish chemistry and panel design inhibit moss and algae growth on shaded, moisture‑prone roofs—beneficial for wooded parcels around Slades Corners
- Backed by a Lifetime‑Limited transferable warranty to support long‑term protection and resale value for homeowners in Slades Corners and Kenosha County
Metal roofing built for Slades Corners's climate
Averages (10-yr): ~838 mm rain and 84 cm snow per year, ~3084 sunshine hours, mean 9.4°C, typical daily-max winds ~19 km/h with gusts to 100 km/h, and ~83 freeze–thaw days per year.
- 84 cmavg. snow / year
- 838 mmavg. rain / year
- 83freeze–thaw days / year
- 100 km/hpeak wind gusts
- 3084 hrsannual sunshine
- 9.4°Cmean temperature
Interlock® aluminum roofing is engineered for these conditions — wind-rated to 193+ km/h (120 mph), UL 2218 Class 4 impact-rated, Class A fire-rated, and built to shed snow and resist ice dams and freeze–thaw cracking, backed by a lifetime limited warranty.
Interlock Industries (Midwest) Inc.
- 2355 Fairview Ave N, Roseville, MN 55113, United States
- Phone 414-348-8870
- Local lines Minnesota 612-800-8686
- Sales & Marketing [email protected]
- Toll-Free 1-866-733-5811
- Customer Service [email protected]
- www.WisconsinMetalRoofoing.com
- Also wisconsinmetalroofing.commidwestmetalroofing.com
- License WI #898136
- EPA Lead-Safe Certified Firm #NAT-F224594-2
- Serving Wisconsin since 2001 — 25 years
Hours
- Monday9:00 AM – 5:00 PM
- Tuesday9:00 AM – 5:00 PM
- Wednesday9:00 AM – 5:00 PM
- Thursday9:00 AM – 5:00 PM
- Friday9:00 AM – 5:00 PM
- SaturdayClosed
- SundayClosed
Interlock Metal Roofing Wisconsin is a trusted metal roofing contractor proudly serving homeowners and businesses throughout the State of Wisconsin. Backed by decades of manufacturing and installation expertise, Interlock has earned a reputation for exceptional craftsmanship, long-term reliability, and outstanding customer care. As a specialized installer of premium aluminum and standing seam metal roofing systems, Interlock Metal Roofing Wisconsin provides exclusive lifetime roofing products engineered to perform in Wisconsin’s demanding climate — from heavy snow loads and ice dams to hailstorms, high winds, freezing temperatures, and dramatic seasonal weather swings. Built on integrity, professionalism, and superior workmanship, Interlock Metal Roofing has completed thousands of successful roofing installations across North America, helping Wisconsin property owners invest in roofing systems that are both beautiful and built to endure. Our team is known for transparent communication, efficient project execution, and meticulous installation standards, supported by industry-leading materials and comprehensive warranty protection. Interlock’s commitment to excellence is reflected in its dedication to safety, ongoing installer training, and strong customer satisfaction throughout the region. With highly trained crews and strict adherence to best practices, we deliver durable, energy-efficient roofing solutions that enhance curb appeal, increase property value, and provide decades of dependable protection against Wisconsin’s harsh winters and severe storm conditions. Whether you need a residential metal roof replacement, a commercial roofing upgrade, or a custom architectural metal roofing system, Interlock Metal Roofing Wisconsin is the trusted choice for premium lifetime metal roofing — combining proven expertise, exclusive products, and service you can count on.
Recognition GuildQuality Guildmaster Award — verified customer satisfaction (GuildQuality)
Accredited BBB Accredited A
Get a Free Metal Roof Estimate in Slades Corners, Wisconsin
Interlock® Aluminum Roofing — all-climates performance specs for Slades Corners, Wisconsin
| Spec / Rating | Climate / Risk Factor + What It Solves |
|---|---|
| Wind resistance: 120+ mph (193+ kph) | Extreme wind, hurricanes, storm uplift: full interlocking attachment helps prevent blow-offs, edge lifting, and panel loss in high-gust events. |
| Fire rating: Class A (with proper assembly) | Wildfire, embers, radiant heat, chimney sparks: non-combustible roof assembly provides the highest residential fire protection rating. |
| Hail resistance: UL 2218 Class 4 | Hail and impact debris: highest impact classification; resists cracking, splitting, and surface loss common with asphalt under hail strikes. |
| Snow & ice performance: interlocking, shedding profile | Heavy snow, freeze-thaw, ice dams: smooth aluminum sheds snow efficiently and the interlocking design helps block water intrusion when melt-refreeze cycles occur. (Final snow-load capacity depends on roof structure and local code.) |
| Corrosion resistance: aluminum (won’t rust) | Salt air, coastal humidity, wet climates: aluminum naturally resists rust and corrosion, reducing long-term failure risk in marine or high-moisture environments. |
| Heat / UV durability: baked-on coating system | High heat, intense sun, thermal cycling: coatings resist UV breakdown and temperature-swing fatigue, slowing fading and surface degradation. |
| Moss / algae resistance: smooth coated surface | Wet shade, organic growth: low-porosity metal surface gives moss/algae less to grip, reducing staining and maintenance. |
| Material: heavy-gauge aluminum roof profiles (Slate / Shake / Shingle / Tile / Standing Seam) | All-season structural stability: lightweight, dent-resistant metal system stays stable through large hot-cold swings and severe weather. |
| Expected lifespan: 50+ years | Long-term durability across climates: avoids re-roof cycles typical of shorter-life materials, even in high-stress environments. |
| Warranty: Lifetime-Limited, non-prorated + 50-year transferable | Lifetime protection + resale value: guarantees long-term material confidence and transfers to future owners. |
Available Profiles in Slades Corners, Wisconsin:
Explore all Interlock® metal roofing systems, or see the Guardian lifetime warranty and independent testing reports.
Recent Interlock® roofs across Wisconsin
Completed Interlock® metal roofs near Slades Corners, WI
Every marker is a real, anonymized Interlock® aluminum roof completed by a Certified Interlock Installer. Explore verified Interlock® installations near Slades Corners, Wisconsin, United States on the interactive project map and photo grid — filter by roof profile (Slate, Cedar Shingle, Shake, Mediterranean Tile, Standing Seam, Solid Copper), colour and year of completion.
Open Slades Corners on the interactive project map →Browse all Interlock® projects in Wisconsin →See more Interlock® projects →
What our customers are saying:
Your home is your greatest investment, sheltering you from the storms. Don’t nickel and dime yourself when choosing a roof, you get what you pay for. We chose Interlock aluminum roofing for our house,and are totally pleased with it. Aluminum doesn’t rust period. The current rage of steel roofing is a racket preying on uninformed consumers who want something for next to nothing. Steel roofs are coated to prevent rust. However, once these coatings wear off rust sets in. I have personally seen an 18 year-old steel roof with significant rusting after the coating was gone. Do yourself a favor, get an Interlock aluminum roof. Dean Landers 5 star review June 9/2026 Janesville WI
I had Interlock put on a beautiful red slate roof 17 years ago.The roof still looks beautiful. 5 years ago, I had them also re-roof my garage with the same type of slate. The roofs look gorgeous and I have no maintenance whatsoever.I get complements all the time. The guy whom I contracted with was named "Tim' but has since died. He was a really nice guy. Back in 2009, the roof was much cheaper. ( I actually paid more for the garage 5 years ago!) I am extremely happy with the roofs. The guys did a wonderful job, replacing rotted boards where necessary. They also told me about very cheap gutters I could buy at Menards instead of those ridiculously - priced "special" gutter systems. I bought them and they placed them on my buildings.This home will go to my daughter one day; I do not want her to have to lift a finger. Note that I had an asphalt roof previously. It lasted only 12 years. The shingles curled up under the sun and cracked. They looked terrible. I can honestly say that these metals roofs by Interlock are very much worth what you pay for them. They will last a lifetime with almost no maintenance. Instead of replacing a roof every 15 years and paying lots for asphalt or fiberglass, their metal roofs last very long and you will never have to re- roof again.
One and Done! Roof should be good for our lifetime and our kids lifetime and possibly our grandkids. Keep the farm in the family :)
Resident at the home was dissatisfied with the clean up as a mess was left on the deck area.
It's too early to tell. The roof looks good and has held up against rain for one month. Scheduling the project was very challenging. It took lots of pushing and back and forth to establish a two week window, months out, for the installation. It took from October until August the next year from start to finish. This most likely wouldn't be an issue for most people, but my roof was already leaking and my work schedule is abnormal. The installation team was excellent. Nice people, clear interactions and expectations.
The crew did a very good job. They were very cordial and answered all my questions very well. The timeframe for when it was going to be completed fell short of my expectations. I don't know if they can do anything about it, but we are still getting remnants from when they cut. I just picked up another piece today. When they are cutting, they are probably leaving those things on the roof somewhere, and eventually they blow down and are sharp. I worry about people walking on them.
The crew was great and easy to work with. They need to advertise their project, and it would be great to have that sign out front. I have had people ask about where I got it done. Everyone was very polite, courteous, and helpful. They answered all of my questions.
They can improve their communication after signing the contract with a salesperson. There were a few months where I didn't have a direct contact to check in for materials during the timeframe of the project because I had a couple of projects going on at the same time with the solar panels being installed. It all worked out, but I think that would be an area to improve in. It looks beautiful, and I love it!
The communication could be improved, as well as the follow-up. I wonder how responsive they will be in the future. Their work was amazing but the communication wasn't. Communication was very poor, but the roof is amazing and its quality good.
Better communication around delays in start date. I would have been find with delays if they were transparent and kept to date as we passed what we were told multiple times.
Nearby service areas in Kenosha County
Interlock® metal roofing is also installed in these communities near Slades Corners:
Interlock Industries (Midwest) Inc. also services nearby States
Beyond Slades Corners, our team installs Interlock® metal roofing across:
Metal Roofing FAQs for Homeowners in Slades Corners
The following metal roofing FAQs are designed specifically for homeowners in Slades Corners, Wisconsin. Whether you are building a new home or replacing an existing roof, understanding how roofing materials perform in local weather conditions is essential. From wind and storm protection to fire resistance, hail impact, snow loads, and coastal moisture exposure, Interlock’s Lifetime Aluminum Roofing System is engineered to provide long-term durability, energy efficiency, and peace of mind in Slades Corners.
How does a metal roof handle Wisconsin snow and ice buildup?
Interlock's smooth, interlocking aluminum panels shed snow and ice more effectively than asphalt, reducing ice-dam risk in climates like Slades Corners that see about 84 cm of snow annually. The lightweight design—the Slate profile weighs just 0.41 lb/sq ft—means no structural load concerns even after heavy snow events. Panels are warranted to resist wind gusts up to 120 mph, so spring thaw winds won't lift edges. Custom snow guards are available if you want to manage roof runoff strategically.
Will freeze-thaw cycles in Kenosha County damage a metal roof over time?
No—aluminum's oxide layer actually self-heals when exposed to freeze-thaw stress, making it ideal for regions averaging 83 freeze-thaw days per year like yours. Unlike asphalt shingles that crack and curl under repeated temperature swings, or wood that splits, aluminum expands and contracts uniformly without degradation. The four-way interlocking panels accommodate movement while maintaining weather-tight seals, so seasonal cycling strengthens rather than weakens the roof.
Can aluminum metal roofing rust in a Wisconsin climate?
Aluminum cannot rust because it contains no iron—the element that causes corrosion in steel roofing. Instead, aluminum naturally forms a self-healing oxide layer that protects it even when scratched. Interlock uses roofing-grade 3105-H24 / 3003-H24 aluminum alloy (ASTM B209) with a Alunar 70% PVDF fluorocarbon finish applied to both sides, warranted 30 years against chalking and fading. In Wisconsin's 838 mm annual rainfall, this dual-coat protection is especially valuable, ensuring decades of corrosion-free performance.
Do I need to reinforce my house to support a metal roof?
Almost never. Interlock's Mediterranean Tile profile—which replicates heavy clay tile—weighs just 0.59 lb/sq ft, making it about 96% lighter than concrete or clay tile. You can install it over most existing roofs without structural work. This lightweight design is one reason Interlock installs from coastal homes to Antarctic research stations: the aluminum alloy distributes its minimal load evenly, eliminating the expensive foundation or rafter upgrades that slate or tile would demand.
Is my metal roof protected if hail hits Slades Corners?
Yes. Interlock's panels carry a UL 2218 Class 4 impact rating—the highest available—and the Guardian Warranty even covers perforation from hailstones up to 1.5 inches. Class 4 means the roof withstands repeated impacts from ice balls larger than most regional hail events. Many homeowners report insurance premium reductions after installing impact-rated metal roofing. Combined with Wisconsin's typical wind gusts around 100 km/h, this impact resilience gives you genuine peace of mind year-round.
How well does a metal roof hold up in Wisconsin wind storms?
Interlock's four-way interlocking aluminum panels are warranted to resist wind speeds up to 120 mph (193 km/h) when installed to specification. In Slades Corners, where typical wind gusts reach about 100 km/h, this provides substantial safety margin. The interlocking design transfers wind load across multiple panels rather than stressing individual fasteners, so spring and autumn storms that would loosen asphalt shingles leave your roof unaffected. This engineering is why Interlock panels meet ICC-ES ESR-1790 (IBC/IRC, reissued 2025) standards.
What warranty comes with Interlock metal roofing, and how long will it last?
The Guardian Warranty is a lifetime limited, non-prorated material warranty for the original owner—covering rusting, rotting, splitting, cracking, curling, and loss of impact resistance. It transfers once to the next owner for 50 years from completion, a powerful feature if you ever sell. Interlock has manufactured its aluminum roofing since 1998, with proven installations from coastal salt-air homes to extreme environments. This warranty reflects the company's confidence in material durability over the roughly 84 cm of snow and 838 mm rain Slades Corners receives annually.
How much maintenance does a metal roof really need?
Far less than asphalt, wood, or tile. Aluminum panels don't degrade, split, curl, or require re-sealing. They're CALGreen-verified for reduced maintenance, meaning you'll avoid the leaf-clearing, moss-treatment, and shingle-replacement cycles of traditional roofs. Wisconsin's about 3,084 sunshine hours per year keep the Alunar coating bright, and rain naturally cleans the smooth surface. Periodic gutter clearing is all most homeowners do—a dramatic difference from asphalt's 15–20 year replacement cycle or wood's ongoing staining and repair demands.
Does a metal roof help lower cooling and heating costs in Wisconsin?
Yes, especially in summer. Interlock's energy-efficient colors achieve thermal emissivity of 0.84 and solar reflectance up to 0.55, meaning they reflect heat that asphalt absorbs and re-radiates into your home. With Slades Corners averaging 3,084 sunshine hours annually, this reflective performance reduces air-conditioning load on hot days. The Cool Roof Rating Council certification confirms measurable energy savings. While winter heating isn't dramatically affected, the year-round durability means you're not tearing off and replacing an asphalt roof every 15–20 years, eliminating embodied-energy waste.
Is metal roofing better for the environment than asphalt shingles?
Significantly. Interlock aluminum panels are approximately 95% recyclable at end of life, breaking the asphalt tear-off-to-landfill cycle that happens every 15–20 years. Because the material lasts decades longer and installs over most existing roofs, you eliminate multiple replacement cycles' worth of waste. Wisconsin's 838 mm annual rainfall and freeze-thaw stress (83 days per year) accelerate asphalt failure, making the environment-cost of repeated replacements substantial. Choosing aluminum from the start means one installation, no landfill contributions, and full recyclability when eventually retired.
Is a metal roof a good choice for Slades Corners’s climate?
Yes. Slades Corners averages about 84 cm of snow, 838 mm of rain, roughly 83 freeze–thaw days a year, with peak wind gusts near 100 km/h. Interlock® aluminum roofing is wind-rated to 193+ km/h (120 mph), UL 2218 Class 4 impact-rated and Class A fire-rated, and its four-way interlocking panels shed snow and resist ice dams and freeze–thaw cracking — all backed by a lifetime limited, transferable warranty.













